• New 5L Rotary Evaporator
  • New 5L Rotary Evaporator
  • New 5L Rotary Evaporator
  • New 5L Rotary Evaporator
  • New 5L Rotary Evaporator
  • New 5L Rotary Evaporator
  • New 5L Rotary Evaporator
  • New 5L Rotary Evaporator
  • New 5L Rotary Evaporator
  • New 5L Rotary Evaporator
  • New 5L Rotary Evaporator
  • New 5L Rotary Evaporator

New 5L Rotary Evaporator

Model: R-1005

Rotary evaporator is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. Rotary evaporator is the use of stepless speed control glass rotating bottle constant speed rotation.

Description:

Rotary evaporator is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation.

Rotary evaporator is the use of stepless speed control glass rotating bottle constant speed rotation, the material in the bottle wall to form a large area uniform film, and then by the intelligent constant temperature water bath on the rotating bottle of uniform heating, vacuum conditions, high-speed evaporation, Efficient glass condenser cooling, recovery in the collection bottle.

Feature:

1. The main body of the use of stainless steel + aluminum alloy, reasonable structure, materials stress.

2. Glass parts are all high borosilicate glass (GG-17), high temperature, anti-corrosion.

3. Sealing system imported fluorine rubber and Teflon two-way combination of sealed, corrosion-resistant long life, to maintain high vacuum.

4. Vacuum pressure gauge shows real-time vacuum, oily table with anti-vibration characteristics.

5. Vertical three-tier serpentine coil condenser, the main cold + cold dual condenser to ensure high recovery rate.

6. Can be continuous feeding for customers to use, valve-type feeding valve sets of tetrafluoroethylene tube.

7. Collection of bottles with a discharge material to facilitate the evaporation of the collection of extract, discharge.

8. Check valve control, continuous discharge, the machine in the working state, can be vacuum switch.

9. All valves with the latest one hand wheel valve, good sealing, the operation is more simple and convenient

10. Microcomputer power switch control.

11. LCD full screen display, temperature, speed double digital display, bath pot thermostat control, PT100 sensor fast and accurate delivery temperature.

12. DC brushless motor, rotating stability, no spark, slow increase force.

13. Bath electric lift, lift part of the use of slowdown power motor, lifting process more smoothly.

14. pot gallbladder with high quality 304 stainless steel, corrosion and durable, pot gallbladder outer layer of silicone layer, high temperature use more secure.

15. Over-temperature safety protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will automatically turn off the power.

16. anti-dry function, heating pot water level below the heating pipe, the machine will automatically power off.

17. If the machine is suddenly powered off and the power is turned on again, the machine will automatically stop heating.详情1.jpg详情2.jpg

Model

R-1005

Voltage/Frequency

220V/50HZ

Whole power

2100W

Rotary power

60W 1/5

Lifting power

40W 1/12.5

Heating power

2000W

Vacuum degree

0.0095Mpa

Rotary flask volume

5L,Φ230mm/Φ80  Flange   port

Receiving flask volume

3L,Φ195mm/Upper with Φ50 *Φ35 falnge *2,  down with Φ50 flange port

Rotary speed

0-120rpm/min

Temp.cotrolling range

room temperature -180℃

Temp. accuracy

±1℃

Flask lifting distance

140mm

Condenser size

Φ120*600H(mm), side    Φ50 flange port * down with Φ50 flange port

Condensation area

0.5㎡

Air guide bottle

Left with Φ35 flange port , side  with Φ50 flange port, right with Φ50 flange   port

Charging valve

Φ35 flange port, glass+PTFE valve, feed nozzle (pagoda-shape   connectors) outer diameter 12mm

Vacuum suction nozzle

Pagoda-shape connectors, outer diameter 10mm

Condensing coil in and out circuation nozzle

Pagoda-shape connectors, outer diameter 16mm

Vent valve

Φ35 flange port*2, glass+PTFE valve, vent nozzle   (pagoda-shape connectors), outer diameter 12mm

Baiting valve

Φ50 flange port, side discharging nozzle(pagoda-shape   connectors), outer diameter 20mm, 260mm from the floor

Pot bravery size

Φ295*170H(mm) about 12L

Overall dimensions (W*L*H)

980*480*1260mm

Net weight

46kg

Packing dimensions

800*450*1090mm , 0.39m³

Packing weight

68kg

Model R-1005 R-1010 R-1020 R-1050
Voltage/Frequency 220V/50HZ 220V/50HZ 220V/50HZ 220V/50HZ
Whole power 2100W 3100W 5100W 6640W
Rotary power 60W 1/5 60W 1/5 60W 1/5 100W 1/5
Lifting power 40W 1/12.5 40W 1/12.5 40W 1/12.5 40W 1/12.5
Heating power 2000W 3000W 5000W 6500W
Vacuum degree 0.0095Mpa 0.0095Mpa 0.0095Mpa 0.0095Mpa
Rotary flask volume 5L,Φ230mm/Φ80  Flange   port 10L,Φ280mm/Φ95  Flange   port 20L,Φ355mm/Φ95  Flange   port 50L,Φ470mm/Φ125 flange port
Receiving flask volume 3L,Φ195mm/Upper with Φ50 *Φ35 falnge *2,  down with Φ50 flange port 5L,Φ230mm/ upper  with   Φ60 *Φ35 flange port*2*down with Φ50 flange port 10L,Φ280mm/ upper  with   Φ60 *Φ35 flange port*2*down with Φ50 flange port 20L,Φ355mm/ upper with Φ60 flange port*Φ35 flange   port*Φ2*down with Φ50 flange port
Rotary speed 0-120rpm/min 0-120rpm/min 0-120rpm/min 0-120rpm/min
Temp.cotrolling range room temperature -180℃ room temperature -180℃ room temperature -180℃ room temperature -180℃
Temp. accuracy ±1℃ ±1℃ ±1℃ ±1℃
Flask lifting distance 140mm 190mm 150mm 215mm
Condenser size Φ120*600H(mm), side    Φ50 flange port * down with Φ50 flange port The main condenser
Φ120*620H(mm)  upper with Φ60 flange port * down with Φ80   flange port
  The assisted condenser Φ135*475H(mm)    upper with Φ80 flange port* down with    Φ60 flange port*side with Φ60 flange port
The main condenser Φ130*700H(mm)  upper with Φ60 flange port * down with Φ80   flange port
  The assisted condenserΦ160*530H(mm)    upper with Φ80 flange port* down with    Φ60 flange port*side with Φ60 flange port
The main condenser Φ160*835H(mm) ,upper with Φ60 flange*down   with Φ80 flange
  The assisted condenser Φ160*530H(mm) ,upper with Φ80 flange *down with Φ60   flange *side with Φ60 flange
Condensation area 0.5㎡ 0.51(0.33+0.18)㎡ 0.94(0.46+0.48)㎡ 1.44(0.95+0.49)㎡
Air guide bottle Left with Φ35 flange port , side  with Φ50 flange port, right with Φ50 flange   port Left with Φ35 flange,upper with Φ35flange,side with  Φ60 flange,right with Φ60 flange Left with Φ35 flange,upper with Φ35flange,side with  Φ60 flange,right with Φ60 flange Left with Φ35 flange,upper with Φ35flange,side with Φ60 flange,right  Φ60 flange
Charging valve Φ35 flange port, glass+PTFE valve, feed nozzle (pagoda-shape   connectors) outer diameter 12mm Φ35 flange,glass+PTFE valve,feed nozzle (pagoda-shape connectors) outer diameter 12mm Φ35 flange,glass+PTFE valve,feed nozzle (pagoda-shape connectors) outer diameter 12mm Φ35 flange,glass+PTFE valve,feed nozzle (pagoda-shape connectors) outer diameter 12mm
Vacuum suction nozzle Pagoda-shape connectors, outer diameter 10mm Φ60 flange glass exhaust pipe suction nozzle (pagoda-shape   connectors), outer diameter 10mm Φ60 flange glass exhaust pipe , suction nozzle (pagoda-shape   connectors), outer diameter 10mm Φ60 flange glass exhaust pipe, suction nozzle (pagoda-shape   connectors), outer diameter 10mm
Condensing coil in and out circuation nozzle Pagoda-shape connectors, outer diameter 16mm Pagoda-shape connectors, outer diameter 16mm Pagoda-shape connectors, outer diameter 16mm Pagoda-shape connectors, outer diameter 16mm
Vent valve Φ35 flange port*2, glass+PTFE valve, vent nozzle   (pagoda-shape connectors), outer diameter 12mm Φ35 flange port*2, glass+PTFE valve, vent nozzle   (pagoda-shape connectors), outer diameter 12mm Φ35 flange port*2, glass+PTFE valve, vent nozzle   (pagoda-shape connectors), outer diameter 12mm Φ35 flange  port*2,   glass+PTFE valve, vent nozzle (pagoda-shape connectors), outer diameter 12mm
Baiting valve Φ50 flange port, side discharging nozzle(pagoda-shape   connectors), outer diameter 20mm, 260mm from the floor Φ50 flange port, side discharging nozzle(pagoda-shape   connectors), outer diameter 20mm, 210mm from the floor Φ50 flange port, side discharging nozzle(pagoda-shape   connectors), outer diameter 20mm, 210mm from the floor Φ50 flange port, side discharging nozzle(pagoda-shape   connectors), outer diameter 20mm, 300mm from the floor
Pot bravery size Φ295*170H(mm) about 12L Φ350*220H(mm) about 21L Φ450*560H(mm) about 41L Φ550*320H(mm)   about 76L
Overall dimensions (W*L*H) 980*480*1260mm 1130*470*1940mm 1210*610*2170mm 1390*700*2300mm
Net weight 46kg 64kg 78kg 97kg
Packing dimensions 800*450*1090mm , 0.39m³ 980*520*1190 ,0.61m³ 1050*530*1210 ,0.68m³ 1230*630*1420 ,1.1m³
Packing weight 68kg 101kg 110kg 142kg



Know What You Want?

We have got an exceptionally passionate team here at Zhengzhou Elab Instrument Co., Ltd. ready to help you find possible solutions for optimum performance.

Need More Support?